calibre自带v2lvs命令使用指南

EDA
0 字 / 约 0 分钟
2011/8/12

做为现今流行的 深亚微米集成电路物理验证工具，calibre 有其强大的功能，其 v2lvs命令能够方便的把verilog格式网表转为spice格式网表，对于IC后端的工程师来说是非常有用，且有必要掌握的。

命令 ​

v2lvs

可用参数 ​

[-l verilog_lib_file] [-lsp spice_library_file] [-lsr spice_library_file] [-s spice_library_file] [-s0 groundnet] [-s1 powernet] [-sk] [-p prefix] [-w warning_level] [-a array_delimiters] [-c char1[char2]] [-u unnamed_pin_prefix] [-t svdb_dir] [-addpin pin_name] [-b] [-n] [-i] [-e] [-h] [-cb] [-ictrace]

参数介绍： ​

  • -v verilog_design_file Specifies the filename of the input Verilog structural netlist.
  • -o output_spice_file Specifies where to place the output LVS SPICE netlist. Default is standard out.
  • -l verilog_lib_file Specifies the location of the Verilog primitive library file. It is not translated.
  • -lsp spice_library_file Specifies SPICE library file name using pin mode. The SPICE file is parsed for interface configurations. Pins with pin select ([ ]) annotation are kept as individual pins using escaped identifiers.
  • -lsr spice_library_file Specifies SPICE library file name using range mode. The SPICE file is parsed for interface configurations. Pins with pin select ([ ]) annotation are assembled into Verilog ranges.
  • -s spice_library_file Specifies that the -o output file have a .INCLUDE statement placed at the beginning that points to the SPICE library file.
  • -s0 groundnet Specifies the default net name for mapping to pin connections with a value of zero (0). Outputs the specified names in place of Verilog supply0 nets and generates .GLOBAL declarations in the output netlist.
  • -s1 powernet Specifies the default net name for mapping to pin connections with a value of one (1). Outputs the specified names in place of Verilog supply1 nets and generates .GLOBAL declarations in the output netlist.
  • -sk Specifies that Verilog supply0 and supply1 nets are not connected to the global power and ground nets.
  • -p prefix Adds prefix to Verilog gate level primitive cells.
  • -w warning_level Controls the amount of warning message output. Possible level choices are:
    • 0 Selects to output no warning messages.
    • 1 Selects to output warning messages for skipped blocks and modules only.
    • 2 Selects to output level 1 and calls to undeclared modules and pin arrays with widths wider than ports. This is the default.
    • 3 Selects to output level 2 and called port array mismatches and unsupported compiler directives.
    • 4 Selects output level 3 plus all ignored constructs.
  • -a array_delimiters Changes the array delimiter characters. The default is [ ].
  • -c char1[char2] Sets the substitution characters for escaped identifier characters illegal in SPICE. char1 replaces $, comma, (, ), and =. char2 replaces /. No space is needed between the two user-supplied arguments.
  • -u unnamed_pin_prefix Specifies a prefix to add to unnamed pin connections in module instantiations.
  • -t svdb_dir Adds source netlist pin direction information to the SVDB. This is used in Calibre xRC.
  • -addpin pin_name

应用举例 ​

《利用v2lvs和nettran将.v(verilog)网表转为spice》